If your Kia is equipped with gas-charged lift/supports, you may need to replace them if your hood no longer stays up.
The hood struts wear out over time and need to be replaced.
Hood won't stay up
Gas filled hood lift / supports no longer work
Hood falls down after you open it
To fix all these problems you will need to replace the hood lift supports.
What you will need
- Open hood. Pull the hood release under the dashboard and open the hood.
- While a helper keeps the hood up, you use a flat screwdriver to remove the C clip from the hood support.
- Continue to have the helper keep the hood in the open / up position as you remove the hood struts. Some models have the ball joint on one side and a bolt on the other.
- Install the new hood support. Make sure the strut is pressed all the way into the ball joint then press the clip in. Watch the following video for further details.
These instructions apply to all Kia vehicles with hood struts including Optima, Sedona, Borrego, Cadenza, Forte, K900, Soul, Sportage.
Frequently Asked Questions
- Should I replace both hood struts?
- It is recommended that you replace both hood struts at the same time. You may be able to get away with just replacing one hood strut. It is very likely that the other hood lift is going to fail in the near future. This, of course, applies to vehicles with two hood sturts. Some models have only one hood support.
- How much does it cost to change the hood lift support on a Kia?
- If you replace the hood lift support yourself you will spend between $30-$45, which is the cost of parts. If you are going to replace the hood struts at a Kia dealer or an auto mechanic you may spend between $100-$150 USD.