ABS light cruise control, traction control light

carlos Lovera • 1 November 2019

I recently replaced the front wheel bearing , both sides. Since then all these light are on. Even before the car moved the abs light was on. There are no markings on the bearing or seal so it is not a reading problem.  Took it to three mechanics and after paying big bucks nothing. The sensors were replaced. Something about distance not correct. They do not know.

Pretty straight forward job but a nightmare afterwards. 

Have any of you had this problem?


The first thing that I would check is the ABS wheel speed sensor. The wire harness to the sensor may have gotten damaged.

Another possibility is a faulty clock spring.

In order to help you we need the codes that are present in the ABS module. Can you get those from the mechanic that worked on the car?

  • Log in or register to post comments